Homemade Guitar Case for Cigar Box Guitar
- Jul 30, 2011
- in Guitar Kit Builder - Acoustic Guitars
Here's a nice video of a guitar case build using 10mm (about 3/8") pine wood for the sides and 6mm (about 1/4") plywood for the top and bottom. The frame is glued and nailed together, then covered with black textured vinyl and roadcase corners. 25mm (1") hard foam was used to create a support cavity for the guitar, and acoustic foam was used in the lid. Great job to 44Lucy44!
Guitar Kit Builder - the Online Magazine for Builders & Modders of Guitars, Amplifiers and Effects. Welcome!
GKB DIRECTORIES
2 Comments - Please Use the Form Below to Join the Conversation!
I purchased a cigar box electric acoustic guitar for my boyfriend and its made by Old Crow Customs and I’m looking for a case for it. Do u know sumone who may have one for sale or sumone who can make me one for him ? Thank u and greatly appreciated for any info u can provide !!
Would you let me hire you to build me a case just like this? It wouldn’t even have to be covered in vinyl if you didn’t want to mess with that. Thanks for considering it. Take care. Jeff